Westerbeke 120D-TWO Bedienungsanleitung PDF herunterladen (Seite 24)

Component Removal and Replacement

R020 - #2 Mirror

Table of Contents

Note: Be careful not to touch the #2 Mirror.

1. Make sure the VLS is powered OFF and unplugged.

2. Open the top door and slowly slide

the X-Axis Arm (1) forward.

3. Locate and carefully remove the large

thumb screw securing the cover on

the left-hand side of the X-axis arm.

Once the thumbscrew is removed

slide the cover to the right and up and

set it aside.

4. Grab a hold of the Bezel Mirror

Holder and turn it counter clockwise

to remove it. Place it in a safe place.

5. Replace the #2 Mirror with the new

mirror by verifying that the reflection

side is facing inside the laser

machine. Installing the mirror

backwards within the bezel will

destroy the mirror once the laser

beam penetrates the backside of

the mirror, so be sure that you re-

install the mirror correctly.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Keine Kommentare

Westerbeke 120D-TWO Bedienungsanleitung Seite 24