Westerbeke 120D-TWO Bedienungsanleitung PDF herunterladen (Seite 11)

Adjustments and Settings

A020 - CPU Initialization / Auto-Z Calibration

NOTE: This procedure must be performed with the solid aluminum Engraving

Table installed. Do not use the honeycomb Cutting Table for this procedure.

Table of Contents

1. Power up your computer and the PLS. Home the Z-axis by clicking the HOME Z

button in the VIEWER tab of the VCP.

2. Using the UP and DOWN arrow

buttons, either on the machine (enter

the Z Menu) or in the UCP, bring the

Z-axis table up. Using the appropriate

Focus Tool for the lens installed (the

standard is 2.0, other Focus Lens Kits

are optional), focus directly on the

surface of the table.

3. In the UCP, click the SYSTEM tab and choose 2.0 from the Lens Size list.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Keine Kommentare

Westerbeke 120D-TWO Bedienungsanleitung Seite 11