Westerbeke 120D-TWO Bedienungsanleitung PDF herunterladen (Seite 14)

Adjustments and Settings

A040 - Rotary Calibration

Table of Contents

1. Turn on the UCP and PLS.

2. Open the top door.

3. Lower the table about half way down by using the UCP or the keypad.

4. Turn off the PLS.

5. Properly mount the Rotary on top of the engraving table and plug it in.

6. Turn on the PLS.

7. The rotary will automatically rotate to indicate it’s properly connected.

8. Select the System Tab on the UCP

and click on the CALIBRATE button in

the Rotary box. After the button has

been clicked a Rotary Calibration

window will appear with Y Position

and Z Position boxes. Now, in the Y

Position box use the Y Axis buttons

(1) to move the focus carriage back

and forth. Place the focus carriage

exactly at 2.625”.

9. Next, use the X Axis buttons (2) to move the focus carriage left and right and place

the red LED over the flat part of the concave metal fixture normally located on the

left hand side on the rotary.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Keine Kommentare

Westerbeke 120D-TWO Bedienungsanleitung Seite 14