Westerbeke BCD 4.4KW Betreibershandbuch PDF herunterladen (Seite 77)

CAUTION

Failure

the solenoid plunger

bottom in the solenoid will result in a failed solenoid.

To avoid failure

ofthe

solenoid, make sure the solenoid plunger bottoms in the solenoid. Check

the solenoid's operation at the initial start-up. Periodically lubricated linkage joints between

the solenoid plunger and the throttle arm will eliminate binding.

NOTE: The solenoid plunger must move smoothly and rapidly into the solenoid when the

solenoid is electrically energized, drawing the engine's throttle arm into the Set Speed/Run

position.

To arrive at the appropriate frequency, either monitor the speed

the engine/generator with a tachometer,

monitor the frequency with a frequency meter, the latter method being the more precise

the two.

Make sure

10 - 12 volts DC is present at the solenoid's positive

(+)

harness connection during PREHEAT

and

START.

Loss

voltage will affect the solenoid's operation and cause a solenoid failure.

Westerbeke Generators

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 93 94

Keine Kommentare

Westerbeke BCD 4.4KW Betreibershandbuch Seite 77